Skip to main content

Glass

Aluminium & glass partitions

Office cabins, conference rooms and dividers in slim aluminium sections with glass infill — daylight across the whole floor, privacy where you need it.

  • Free site visit, usually within 48 hours
  • Written, itemised quote
  • Fabricated in our own workshop
  • Service after the invoice
Illustration — photos of our glass partitions work are on the way

01Overview

Divide the space, keep the light

Glass partitions divide a floor without cutting off the light. An office can have closed cabins and a meeting room and still feel open, because daylight from the windows reaches the middle of the floor. We build them in aluminium sections with glass infill — the frame gives the partition its strength and a clean, straight line; the glass keeps the room bright.

Where privacy matters, frosted glass, designer films or etched patterns do the job without going back to solid walls. Toughened and laminated safety glass is used throughout, and doors are made in the same sections, so the whole run reads as one.

Partitions work at home too — a glass divider between kitchen and dining, or a partition in the bathroom. From a single bathroom partition to a full office fit-out, Hitesh measures on site and every section is cut in our own workshop.

02Options

Partition options

Not sure which suits your opening? We measure and tell you what will actually work — then quote it.

  • Office cabins

    Glazed cabins for managers and teams, with a matching door.

  • Conference rooms

    Meeting rooms that stay connected to the office around them.

  • Reception fronts

    A clean glass line between the entrance and the workspace.

  • Frosted & film partitions

    Privacy at eye level with frosted glass, films or etched patterns.

  • Room dividers

    Glass dividers for homes, clinics and cafés.

  • Bathroom partitions

    A glass partition to separate the wet area.

03Specification

What goes into it.

Sections, glass and hardware chosen for your opening — not for whatever’s in stock.

Aluminium

A1
Powder-coated & anodised profilesWeather-resistant finishes in any RAL shade — matte, textured or wood-grain.
A2
Slim & heavy-duty sectionsSection chosen to the span and wind load, not to whatever’s in stock.
A3
Branded hardwareRollers, locks, handles and friction stays that survive daily use.

Glass

G1
Toughened & laminated glassSafety glass for doors, railings, partitions and overhead glazing.
G2
Frosted, tinted & reflectivePrivacy and heat control — plus designer films and etched patterns.

04Benefits

Why glass partitions

  • Daylight everywhere

    Light from the windows reaches the middle of the floor.

  • Privacy when needed

    Frosted glass, films or etched patterns where it counts.

  • Safety glass

    Toughened or laminated glass throughout.

  • Slim, clean lines

    Slim aluminium sections in any powder-coated shade.

  • Easy to keep clean

    Glass and aluminium wipe clean — ideal for clinics.

  • Long lasting

    Aluminium won’t rot, warp or rust.

05Ideal for

Who it’s for.

  • Offices & Corporates

    Cabins, conference rooms and reception fronts.

  • Clinics & Hospitality

    Hygienic partitions for clinics, cafés and salons.

  • Homes & Bungalows

    Kitchen and dining dividers, bathroom partitions.

06Our work

See our workmanship.

Photos of our glass partitions work are on the way. In the meantime, here’s the finish we deliver on every job.

All projects

07How we work

Five steps. No surprises.

  1. Site Visit

    We come and measure ourselves. Free, and usually within 48 hours.

  2. Design & Quote

    Section, glass and hardware options with a written, itemised price.

  3. Fabrication

    Cut and assembled in our own Science City Road workshop.

  4. Installation

    Fitted, sealed, aligned and the site left clean when we leave.

  5. After Service

    Adjustments, servicing and repairs — we pick up the phone later too.

08FAQs

Questions about glass partitions

Something else? Call or WhatsApp +91 84888 90170.

Is glass safe for office partitions?

Yes, when it’s safety glass. We use toughened or laminated glass for partitions: toughened glass breaks into small, blunt pieces, and laminated glass holds together if it cracks.

How do you add privacy to a glass partition?

With frosted glass, designer films or etched patterns — full height, or as a band at eye level — so the room keeps its light while the view is blocked.

Can a glass cabin have a door?

Yes. The door is made in the same aluminium sections and glass as the partition, with hardware chosen for daily use.

Do glass partitions block sound?

A partition cuts down noise from the open office, but it won’t match a solid wall. If confidential conversations matter, tell Hitesh at the site visit and we’ll talk through the options.

Why aluminium frames rather than frameless glass?

Aluminium sections give the partition its strength, carry the door and hardware, and make a clean line at floor and ceiling. They also let clear and frosted panels sit in the same run.

How much do glass partitions cost?

It depends on the size, the sections, the glass and the hardware, so we don’t quote blind. After a free site visit you get a written, itemised quote — typically within 48 hours — showing what each part costs.

Free site visit · Itemised quote

Think glass, think Aksharam.

Tell us about the job. Hitesh will come and measure it himself — usually within 48 hours — and send a written, itemised quote for your glass partitions.