Skip to main content

Windows & doors

Sliding & folding door systems

Multi-panel aluminium doors that fold flat and stack into the corner — open a whole wall onto the garden, terrace or lawn.

  • Free site visit, usually within 48 hours
  • Written, itemised quote
  • Fabricated in our own workshop
  • Service after the invoice
Wood-finish aluminium glazed doors wrapping the corner of a house, opening onto a terracotta-tiled patio and garden
Our work — Wood-finish aluminium, corner glazing onto the garden

01Overview

Open a whole wall

A sliding-folding system is the most dramatic way to open a room. The panels run along a track and fold flat against each other, stacking neatly into the corner — so instead of a door in the wall, the whole wall opens onto the garden or terrace.

We make them in aluminium, in slim sections or a warm wood-grain finish. One system we’ve fitted has six wood-finish panels that open a living room straight onto the garden: closed, it’s a wall of glass; open, inside and outside become one space.

Multi-panel sliding doors are the other option when you want wide glazing but don’t need the full opening. Hitesh looks at the opening, the floor and how you’ll use the space, and tells you which suits. Want to see one working? We’ll take you to a site before you decide anything.

02Options

System options

Not sure which suits your opening? We measure and tell you what will actually work — then quote it.

  • Sliding-folding (bi-fold) doors

    Panels fold flat and stack to the side to open the whole wall.

  • Multi-panel sliding doors

    Two, three or more panels that slide past each other.

  • Slim sliding doors

    Minimal frames for the largest possible glass.

  • Corner systems

    Glazing that turns the corner for a view both ways.

  • Wood-finish systems

    Aluminium with a wood-grain finish — the look of timber without the upkeep.

03Specification

What goes into it.

Sections, glass and hardware chosen for your opening — not for whatever’s in stock.

Aluminium

A1
Powder-coated & anodised profilesWeather-resistant finishes in any RAL shade — matte, textured or wood-grain.
A2
Slim & heavy-duty sectionsSection chosen to the span and wind load, not to whatever’s in stock.
A3
Branded hardwareRollers, locks, handles and friction stays that survive daily use.

Glass

G1
Toughened & laminated glassSafety glass for doors, railings, partitions and overhead glazing.
G3
Double glazed unitsSealed DGU for sound insulation on main roads and heat cut on west faces.

SealingEPDM gaskets and structural silicone on every joint — because in Ahmedabad the real test isn’t the summer, it’s the first monsoon.

04Benefits

Why sliding-folding systems

  • Opens the whole wall

    Panels stack into the corner to clear the opening.

  • Slim sightlines

    Narrow aluminium sections, more glass.

  • Wood-finish option

    The look of timber, without swelling or termites.

  • Smooth every day

    Branded rollers and hardware that survive daily use.

  • Safety glass

    Toughened or laminated glass in every panel.

  • Sealed when closed

    Gasket-sealed against the monsoon.

05Ideal for

Who it’s for.

  • Homes & Bungalows

    Living rooms opening onto gardens, lawns and terraces.

  • Clinics & Hospitality

    Cafés and restaurants that open onto outdoor seating.

06Our work

See our workmanship.

Photos of our sliding & folding systems work are on the way. In the meantime, here’s the finish we deliver on every job.

All projects

07How we work

Five steps. No surprises.

  1. Site Visit

    We come and measure ourselves. Free, and usually within 48 hours.

  2. Design & Quote

    Section, glass and hardware options with a written, itemised price.

  3. Fabrication

    Cut and assembled in our own Science City Road workshop.

  4. Installation

    Fitted, sealed, aligned and the site left clean when we leave.

  5. After Service

    Adjustments, servicing and repairs — we pick up the phone later too.

08FAQs

Questions about sliding & folding systems

Something else? Call or WhatsApp +91 84888 90170.

What’s the difference between sliding-folding and sliding doors?

Sliding doors glide past each other, so part of the opening is always covered by a panel. Sliding-folding doors fold flat and stack into the corner, opening the whole wall.

How many panels can a folding system have?

It depends on the width of the opening. One of our systems uses six wood-finish panels to open a whole wall onto the garden — we work out the right number for yours when we measure.

Do sliding-folding doors keep out the monsoon?

Closed, the panels are gasket-sealed like any window. The threshold and floor levels matter too, so Hitesh checks them on site before recommending a system.

Can I get a wood finish?

Yes. Powder-coated wood-grain finishes give aluminium the look of timber, without timber’s swelling in the monsoon or its appeal to termites.

Are they hard to open and close?

No. The panels run on rollers along a track and fold by hand; branded rollers and hardware keep them running smoothly with daily use.

Can I see one working before I decide?

Yes. We’ll take you to a site before you decide anything.

How much do sliding-folding systems cost?

It depends on the width of the opening, the number of panels, the finish and the glass, so we don’t quote blind. After a free site visit you get a written, itemised quote — typically within 48 hours — showing what each part costs.

Free site visit · Itemised quote

Think glass, think Aksharam.

Tell us about the job. Hitesh will come and measure it himself — usually within 48 hours — and send a written, itemised quote for your sliding & folding systems.